Although our system is easy to use and fairly quick to install, there is still a correct way and an incorrect way to install the SCREENEZE system. One of the most important steps to installing the SCREENEZE system is to read the instructions thoroughly before attempting to mount the aluminum base to the opening. Read on to learn more about our Flush and Corner mounts and the proper ways to install them. 

Flush Mount

Corner Mount

Important Reminders

- The beveled edge of the vinyl cap will always face the screen fabric.

- The screen fabric will always come out of the beveled edge side of the cap.

- If the vinyl caps are coming loose or the screen panel is blowing out, the install is likely done backwards and incorrectly. 

- The SCREENEZE system can be mounted using either straight cuts with Plinth kits or using Miter cuts. 

- Always remember to read the instructions thoroughly before attempting installation. 

- Read the cutting tips and mounting details that are located on our website.

- If you ever have any questions, we are more than happy to assist you!

*Both of the above pictures are corner mounts*

Want to share your amazing SCREENEZE installs with us? Use our hashtag #screeneze, tag us @screeneze, or DM us on any of our social media for a chance to have your project featured!

Instagram: @screeneze

Facebook: @SCREENEZE

Twitter: @SCREENEZE